Bitumen Paint Black
Surfaces must be free from oil, dirt, dust and loose material
Metal surfaces – remove all loose rust with a wire brush and treat advanced areas of corrosion with a rust inhibitor
Porous surfaces – apply an initial coat of Thompson’s Bitumen Primer and leave to dry before application
Drinking water tanks – surface should be dry and free from mill scale, rust and dirt. All surfaces should be degreased immediately before application
Apply using a brush
Apply evenly, ensuring any ponding product is distributed on the surface
Resistant to rain after 30 minutes
A minimum of two coats is recommended, allow 24 hours between coats
Drinking Water Tanks:
Apply using a brush to ensure all surfaces are thoroughly covered
Apply two coats, allowing 24 hours between coats. Ensure the first coat is thoroughly dried before applying the second
Before the drinking water tank is put into service, the tank should be filled with cold drinking water and drained after a minimum of 4 hours. If an unfamiliar taste is detected in this water, repeat the process
Named Day Delivery:
Named AM Delivery:
Bulk Named Day Delivery:
Local Delivery 3-5 Working Days:
Damaged or incorrect items
We accept all the major credit/debit cards online. Please note we cannot take credit/debit card orders over the telephone due to security reasons.
Online customers can also pay by Paypal. Just look for the Paypal option during the check out phase. Please note that Paypal will not supply us with your telephone number which we may need to contact you regarding your order. Please remember to leave your telephone number in the notes section during checkout.
We also accept BACS payments or bank transfers, please contact 0191 5871708 for more information.